For immediate assistance any week day from 8 am - 4pm (EST), call our office at 740-452-3601. For after-hours emergency support, please refer to the decal on your equipment or the manual for additional contact information.

Motors and gear motors

Motors and gear motors
TroubleProbable CauseCorrection
Conveyor stops without depressing “STOP”Blown fuses in control transformer secondary (F1). Ascertain cause.Check and replace blown fuses.
Motor overload causing magnetic starter to trip.Reset magnetic overload.
Excessive noise or vibration from motor or reducer.Loose mounting.[LOCK OUT UNIT] Check motor mounting bolts for tightness. Feel if mounting plate is secure. Tighten as required.